Solar Street Lighting is outdoor lighting unit used to illuminate a street or open areas. Solar Street Lights operates from Dusk to Dawn i.e., the lamp automatically switches ON after the sunset and switches OFF after sunrise.
These street lights operate in stand-alone mode.
- Ensures power saving and environment protection.
- Low temperature, Energy Saving and High Performance Lamps
- Low power consumption (1/10 of incandescent, ½ to 2/3 of Fluorescent).
- Hum-Free Operation
- Withstand wide voltage fluctuations
- Reduced Fire hazards
- Cold Start Lighting System
- Maximum Light on working plane
- Long Life > 50,000 Hrs
- No UV radiation
- Easy installation & Maintenance.
Street lighting system consists of SPV Module, Charge Controller Unit, Battery, Luminary, Interconnecting Cables and Pole.
SPV module is fixed firmly on top of the pole with suitable tilt and inclination so as to receive maximum sunlight through out the day. The SPV module thus produces suitable voltage and current, which is used to charge the battery inside the battery box. This energy stored in the battery is used to light up the lamp which is housed inside the luminary during night time.
Charge Controller Unit
The Charge Controller Unit (CCU) is the heart of the system, which controls the charging, discharging of the battery. CCU will increase the battery life by not allowing the battery to deep discharge and overcharge. During deep discharge conditions, the CCU will disconnect the light and a red LED glows on the luminary indicating that the battery is low and needs charging. The green LED on the luminary indicates that the battery is resuming charge. During overcharge conditions the CCU will disconnect the solar module and prevents overcharging of the battery.
The energy generated by SPV module is stored in the battery is used to light up the luminary during night time. Low maintenance tubular lead acid type battery is normally used for street lights. The battery is housed inside a battery box, which is fixed on to the pole at a suitable height from the ground for easy maintenance and replacement.
LED lamp or CFL lamp are used to provide illumination during night times. CCU is incorporated in the Luminary itself.
The SPV module, luminary and battery are interconnected through the cables.
SPV module and the luminary are mounted on steel pipe at a height of 4 meters above ground.